Sunday, December 2, 2012

Writing with Atoms

How can you see single atoms?
Atoms are the building blocks of every cell and every material. An atom is only about 0.3 nm in diameter. To “see” these atoms, you have to use special microscopes. The most famous one, is the AFM (Atomic Force Microscope), which I briefly described in my first post. This technique basically feels the atoms underneath it with a very very sharp tip, ideally so sharp that there is only one atom at the tip. The tip (called cantilever) is scanning slowly over the whole surface and creates a topographical image. Below you can see salt at atomic resolution. Each "dot" is one single atom, isn't that just amazing?
Salt (NaCl) atoms under an AFM.
The frame size is 5nm.
(Image taken from: Jessica Topple)
Who wrote with atoms first?
The first amazing demonstration and milestone of modern nanotechnology, was the fact that one can write and manipulate single atoms. This was first archived by Don Eigler from IBM in 1989. He successfully managed to arrange 35 Xenon atoms to write the famous letters "IBM" (see image below). This was realized with an STM (Scanning Tunneling Microscope) tip. An STM works very similar to an AFM, the main difference is, that the tunneling current between the tip and the sample is controlled and kept constant. With an AFM, the force between the atoms are measured therefore it works on non-conducting materials as well. 

IBM logo with 35 Xenon atoms. (Image taken from IBM) 
How do you write?
Don Eigler, who was the first to ever write with atoms, used an low-temperature ulta-high vacuum (UHV) system (check out my other post on Extreme Science). This system is required in order to have a super clean environment with no other disturbing atoms and to reduce the vibration of the atoms by lowering the temperature. The trick now to move an atom across the surface is to get very close to the atom with the STM tip. At some point, a positive van der Waals attraction between the atom on the tip of the STM and the atom to be moved is created, the atom is attached to the tip. Now by keeping this distance short, the atom can be moved to a different location. Once at the correct position, the STM tip just needs to be moved away from the atom and it stays put. In only 22 hours, the first IBM logo written with single atoms was created.

Why is it important?
First of all, it's fun and amazing! Second, it was the first ever approach for nanometer scale manipulation. Third, you can now move atoms to where you want them to be to create new structures.

Since then, many more universities, institutes and companies all over the world created atomic sized versions of their logo. Here are some cool examples:

Image by: NIST, USA
Image by: Technische Universität München, Germany
Image by: University of British Columbia, Canada

2 comments:

  1. This blog resolved all my queries I had in my mind. Really helpful and supportive subject matter written in all the points. Hard to find such kind of blogs as descriptive and accountable to your doubts.Dell PowerVault MD1400

    ReplyDelete
  2. This blog is really helpful regarding all educational knowledge I earned. It covered a great area of subject which can assist a lot of needy people. Everything mentioned here is clear and very useful. เช็ค ราคา server

    ReplyDelete